Exam PRINCE2 Practitioner PR2P

 

Exam Code: PR2P
Exam Name: PRINCE2 Practitioner (PR2P)
PRINCE2 Practitioner
PRINCE2 Practitioner Syllabus

The Practitioner is the second of the two PRINCE2 examinations you are required to pass to become a Registered PRINCE2 Practitioner.

This PRINCE2 examination is aiming to measure whether a candidate would be able to apply PRINCE2 to the running and managing of a project within an environment supporting PRINCE2. To this end they need to exhibit the competence required for the Foundation qualification, and show that they can apply and tune PRINCE2 to address the needs and problems of a specific project scenario, specifically, candidates must be able to:

Produce detailed explanations of all principles, themes and processes and worked examples of all PRINCE2 products as they might be applied to address the particular circumstances of a given project scenario
Show they understand the relationships between principles, themes and processes and PRINCE2 products and can apply this understanding
Demonstrate that they understand the reasons behind the principles, themes and processes of PRINCE2, and that they understand the principles underpinning these elements
Demonstrate their ability to tune PRINCE2 to different project circumstances.

Who Should Attend?
Project Managers
General Managers
Programme Managers
Team Managers and support staff
Staff who will have a defined role
Project Management Consultants.

Prerequisites
In order to sit the PRINCE2 Practitioner examination you must provide proof of having passed one of the following:
PRINCE2 Foundation
Project Management Professional (PMP)®
Certified Associate in Project Management (CAPM)®
IPMA Level A (Certified Projects Director)
IPMA Level B® (Certified Senior Project Manager)
IPMA Level C® (Certified Project Manager)
IPMA Level D® (Certified Project Management Associate)

Examination Format
150 minute exam duration
68 questions
38/68 required to pass = 55% pass mark
Open book exam (official PRINCE2 manual only)

Sections
1. PRINCE2 Principles
2. Business Case Theme
3. Organization Theme
4. Quality Theme
5. Plans Theme
6. Risk Theme
7. Change Theme
8. Progress Theme
9. Starting up and Initiating a Project
10.Directing a Project, Controlling a Stage and Managing Product Delivery
11.Managing a Stage Boundary and Closing a Project

QUESTION 1
Which of the following principles describes this statement?
"xxx defines tolerances for each project objective to establish limits of delegated authority"

A. Manage by stages
B. Focus on products
C. Manage by exception
D. Learn from experience

Correct Answer: C

QUESTION 2
Which of the following statements is NOT correct?
The Learn from Experience principle suggests that lessons should be actively sought...

A. When Starting a Project
B. When Initiating a Project
C. As the project progresses
D. As the project closes

Correct Answer: B

QUESTION 3
Which of the following principles uses Product Descriptions to provide clarity by defining each product's purpose, composition, derivation, format, quality criteria and quality method?

A. Tailor to suit the project environment
B. Focus on products
C. Manage by stages
D. Continued business justification

Correct Answer: B

QUESTION 4
Which of the following statements is FALSE regarding the Continued Business Justification?

A. The justification for the project must remain the same throughout the project
B. The justification for the project should remain valid
C. The justification for the project may change
D. If the project is no longer justified it should be stopped

Correct Answer: B

QUESTION 5
The Manage by Exception principle sets tolerances for six areas of the project. Time, Cost and Quality are three of them, what are the other three?

A. Scope, People & Resources, Benefit
B. Scope, Risk, Product
C. Risk, Benefit, Product
D. Scope, Risk, Benefit
Correct Answer: D

Section: PRINCE2 Principles
 

Actualkey PRINCE2 Practitioner PR2P exam pdf, Certkingdom PRINCE2 Practitioner PR2P PDF

Best PRINCE2 Practitioner PR2P Certification, PRINCE2 Practitioner PR2P Training at certkingdom.com

JN0-648 Enterprise Routing and Switching, Professional Exam (JNCIP-ENT)

 

Enterprise Routing and Switching Certification Track
The Juniper Networks Certification Program (JNCP) Enterprise Routing and Switching track allows participants to demonstrate competence with Juniper Networks technology. Successful candidates demonstrate thorough understanding of networking technology in general and Juniper Networks enterprise routing and switching platforms.

Certification Path
The Enterprise Routing and Switching certification track is shown below. Click on the tab for a given certification to view its complete details.

EXPERT
Enterprise Routing and Switching, Expert (JNCIE-ENT)

At the pinnacle of the Enterprise Routing and Switching certification track is the JNCIE-ENT practical exam. This exam is designed to validate the networking professionals’ ability to deploy, configure, manage and troubleshoot Junos-based enterprise routing and switching platforms. Throughout this 6-hour practical exam, candidates will build an enterprise network infrastructure consisting of multiple routers and switching devices. Successful candidates will perform system configuration on all devices and configure protocols and features, such as IGPs, BGP, EVPN, Layer 2 features, routing policies, and class of service.

Prerequisite certification
JNCIP-ENT

Exam Details
Exam code: JPR-944
Lab Exam (Hands-on Lab)
Held at selected Juniper Networks testing centers
Exam length: 6 hours
Software Release:
vMX Virtual Router: 18.3
EX Series Switch: 18.4
Junos Space Network Director: 3.5

Exam Objectives
This list is intended to provide a general view of the skill sets required to successfully complete the JNCIE-ENT exam.

On-box and off-box scripts
Commit, OP, and event scripts
PyEZ scripts
Junos Space
Importing devices into Network Manager
Configuration Management
CoS configuration and troubleshoot
Multiple queues
BA classifier
Multifield classifier
Rewrite rules
Policers
EVPN configuration and troubleshoot
OSPFv2, OSPFv3, and IS-IS
Authentication
Multi-area OSPF
NSSA
IPv4 routes using OSPFv3
Routing policy
BGP troubleshoot and configuration
Multi-ISP routing
IBGP route-reflector
Resolution of BGP Hidden Routes
BGP route-selection process
IBGP, LOCAL_PREF, AS-Path, Prepend/MED
Protocol preferences
BGP communities
BGP routing policy
Device-level security
Securing local control plane
Interfaces
AE interface
LACP
VRRP
System-level configurations
SNMP
System logging
User account
DHCP services
NTP
Virtual Chassis
VLAN
IRB interfaces
Private VLAN
802.1Q tunneling
Native VLAN
Spanning tree protocols
Root bridges, root ports, designated ports
Various guards for Spanning Tree
POE and telephony functions
VoIP VLAN assignments, VoIP class of service
POE and LLDP-MED
Layer 2 security
DAI, DHCP snooping, storm control
Layer 2 interface security features
Protocol independent routing policy
Aggregate, generate, qualified next hops, and static routes
Filter-based forwarding
GRE tunnels

Preparation
The resources listed on this section are recommended, but do not guarantee passing scores on JNCP exams. Success depends on each candidate's motivation, experience, and dedication. Candidates may find additional resources not listed on this page helpful as well.

JNCIE-ENT Certification Self-Study Bundle
All courses listed for the underlying certifications.
Junos Documentation
EX4300 Documentation
vMX Documentation
Extensive real-world hands-on experience

QUESTION 1
Which BGP message type contains NLRI information?

A. notification
B. keepalive
C. update
D. open

Correct Answer: C

QUESTION 2
What is the correct authentication processing order on EX Series switches when multiple Layer 2 authentication methods are enabled?

A. MAC RADIUS –> 802.1X –> captive portal
B. 802.1X –> MAC RADIUS –> captive portal
C. 802.1X –> captive portal –> MAC RADIUS
D. captive portal –> MAC RADIUS –> 802.1X

Correct Answer: B

QUESTION 3
You are implementing a single spanning tree instance in your network and want to use the protocol that will
give you the best convergence time in the event of a physical network failure of the root bridge.
Which spanning tree protocol will satisfy this requirement?

A. RSTP
B. STP
C. MSTP
D. VSTP

Correct Answer: A

QUESTION 4
What are three well-known mandatory BGP attributes? (Choose three.)

A. MED
B. AS-path
C. origin
D. next-hop
E. community

Correct Answer: BCD

Actualkey Juniper JNCIP-ENT JN0-648 exam pdf, Certkingdom Juniper JNCIP-ENT JN0-648 PDF

Best Juniper JNCIP-ENT JN0-648 Certification, Juniper JNCIP-ENT JN0-648 Training at certkingdom.com

IIBA Certifications ECBA Entry Certificate in Business Analysis Exam

Entry Certificate in Business Analysis
The Entry Certificate in Business Analysis™ (ECBA™) covers foundational knowledge on how to approach business analysis according to the BABOK® Guide.

ECBA Eligibility
Ensure you register an account with IIBA (already a member login here)

Complete a minimum of 21 Professional Development (PD) hours within the last four years. Your hours can be logged and tracked here.

ECBA Competencies
Stand out from the crowd

ECBA covers the foundational knowledge on business analysis according to the BABOK® Guide and showcases that you have the core knowledge and competencies for the in–demand field of business analysis. Highlight you have the knowledge and be certified by the leading authority in business analysis, IIBA.

Core BA Certification Handbook
The IIBA® guide to pursuing the ECBA™, CCBA® and CBAP® designations. This handbook will describe the process for attaining IIBA certification for our core BA levels.

Business Analysis Knowledge
keyboard_arrow_down

Business analysis and the BA professional 2.5%
Underlying competencies 5%
Business analysis key concepts 5%
Techniques 12.5%
Business analysis planning and monitoring 5%
Elicitation and collaboration 20%
Requirements life cycle management 20%
Strategy analysis 5%
Requirements analysis and design definition 24%
Solution evaluation 1%

1.0 Introduction
Welcome to the IIBA® Core Business Analysis (BA) Certification Handbook. This handbook will describe the process for attaining IIBA certification for our core BA levels listed below and where
information is already on our website, will direct the individual to the specific webpage.
The IIBA® multi-level competency-based core BA certification program recognizes your knowledge and skills and supports your lifelong business analysis career progression.
Each level includes its own eligibility requirements, and competency-based assessment (i.e. exam), and is aligned to A Guide to the Business Analysis Body of Knowledge® (BABOK® Guide).

Level 1
Individuals entering the
BA field
Click here for ECBA
requirements &
exam information

Level 2
Recognizes BA professionals
who have 2-3 years of BA
experience
Click here for CCBA
requirements &
exam information

Level 3
Recognizes BA professionals who lead and have over 5 years
of BA experience. Click here for CBAP requirements & exam information
2.0 Certification Process

Step 1 - Log your hours into your BA Development Log
Professional development (PD) and work history must be logged in your account on the IIBA portal in order to be included in your application. You can log your hours before you pay the application
fee as well as after you have paid the application fee.
Login with your IIBA credentials and select Certification > Log My Hours Proceed to enter your professional development and work experience into your BA Development
Log. To find out what qualifies as PD hours, review the criteria in the Certification FAQs – note that the criteria is different for ECBA™ compared to CCBA® and CBAP®.

Step 2 – Pay Application Fee
When you are ready, pay your application fee. Please note: the application fee is non-refundable and non-transferable. Any hours you already documented in your BA Development Log will be
included in your application if they meet the eligibility requirements.
References required for CCBA® and CBAP® can either be a CBAP® recipient, a career manager, or a client (internal or external). Ideally at least one of your two references will have known you
for at least 6 months.

Step 3 – Complete and Submit Application
Complete any missing information from within your application. Once all your requirements (or goals) are met, you will be able to submit your application.
In order to complete the submission of your application, you will need to agree to both the Terms and Conditions and the Code of Conduct.
After you submit your application, you will be notified via email if your application is Approved or Approved Pending Audit. The latter means your application is being audited - for more information
on this, go to section 4.0 below.
For step by step instructions on how to complete the above steps, please refer to the following ECBA Application Process and CCBA and CBAP Application Process.

Step 4 – Pay Exam Fee
Once your application is approved, you will receive an email confirming this. You have 1 year from the date on your approval email to take your exam. It is your responsibility to ensure you do not let
your application lapse. Otherwise, you will have to reapply to take the exam.
You may request an application extension if you have an extenuating circumstance.

Step 5 – Schedule and Take Exam
You can schedule your exam at any time. We recommend sooner than later to ensure you get your preferred date and time and, so you have a lot of time to take it again if you are not successful on your first attempt. For exam process details including the scheduling process and identification (ID) requirements, click on this link exam preparation. You can take the exam up to 3 times within your 1-year
application period at any time. Once you’ve taken it 3 times, you must wait until your application expires, and reapply and repay to take it again.

3.0 You may also like:
Certification Fees
Cancellation and Reschedule Policy
Certification FAQs
4.0 Audits
If your application is “Approved Pending Audit”, this means your application has been randomly selected for audit.
It is the applicant’s responsibility to obtain and provide verification of any information in the application.
If your application audit is a pass, your application will be approved and you will receive an email confirming your approval and instructing you to proceed to paying your exam fee.
If your audit does not pass, IIBA will provide further details on the reason via email and your application will not be approved. All fees paid will be forfeited. You may reapply after you have
remedied the reasons for the audit not passing. You may also appeal the decision by contacting

5.0 Appeal Process
If an application audit fails, you have the right to appeal by sending  IIBA will have up to 90 days to review the appeal and make a binding decision regarding the validity of your application. You may be contacted by IIBA for any further information and/or clarification that are deemed necessary to validate information. A final decision will then be emailed to you.

6.0 Suspending or withdrawing certification
IIBA reserves the right to revoke the ECBA™, CCBA®, or CBAP® certification at any time after review of a reported professional misconduct or for a misuse of the ECBA™, CCBA®, or CBAP® logo or trademarks.
IIBA also reserves the right to conduct random post-certification audits.
All fees paid shall be forfeited in the event of a revoked or suspended certification. Those certification recipients whose certification has been revoked will not be allowed to reapply for the
ECBA™, CCBA®, or CBAP® for a period to be decided at the discretion of IIBA.

QUESTION 1
What type of knowledge equips a business analyst (BA) with understanding market forces, customer segments, services, products, and regulations?

A. Organizational
B. Industry
C. Solution
D. Methodological

Correct Answer: B

QUESTION 2
A focus group is a form of which type of research?

A. Quantitative
B. Qualitative
C. Statistical
D. Theoretical

Correct Answer: B

QUESTION 3
Video conferencing, electronic calendars, and electronic voting are examples of:

A. knowledge management tools.
B. mapping tools.
C. collaboration tools.
D. word processing tools.

Correct Answer: C

QUESTION 4
When do the participants start generating ideas during a collaborative game?

A. Closing step
B. Exploration step
C. Opening step
D. Iteration step

Correct Answer: C

QUESTION 5
For which part of an initiative is the business analyst (BA) responsible?

A. Authorizing the project
B. Approving solution execution plans
C. Defining the solution approach
D. Accepting risk mitigation plans

Correct Answer: C

Actualkey IIBA ECBA exam pdf, Certkingdom IIBA ECBA PDF

Best IIBA ECBA Certification, Exam-IIBA-ECBA Training at certkingdom.com

DES-5221 Specialist – Implementation Engineer, Data Center Networking Version 1.0 Exam

Certification Requirements
To complete the requirements for this certification you must:

1. Achieve one of the following credentials
• Associate - Networking Version 1.0
• Dell Certified Associate – Networking (Valid if already earned, but not achievable anymore)
• Dell Certified Professional – Networking (Valid if already earned, but not achievable anymore)

2. Pass the following Implementation Exam
• DES-5221 Specialist - Implementation Engineer, Data Center Networking Exam

Note: These details reflect certification requirements as of November 15, 2019.
Other Certification Recommendations

Once you have achieved this Certification you may be interested in:
• Specialist – Implementation Engineer, Campus Networking
The Proven Professional Program periodically updates certification requirements. *Please check the Proven Professional CertTracker website regularly for the latest information and for other options to meet the Associate level requirement.

Overview
This exam is a qualifying exam for the Specialist – Implementation Engineer, Data Center Networking track.
This exam focuses on concepts related to the Data Center environment and Dell EMC Networking’s S-Series and Z-Series products. Focus is on Dell EMC Networking SmartFabric OS10-based protocols and features.
Dell Technologies provides free practice tests to assess your knowledge in preparation for the exam. Practice tests allow you to become familiar with the topics and question types you will find on the proctored exam. Your results on a practice test offer one indication of how prepared you are for the proctored exam and can highlight topics on which you need to study and train further. A passing score on the practice test does not guarantee a passing score on the certification exam.

Products
Products likely to be referred to on this exam include but are not limited to:
• Dell EMC Networking S-Series Switches
• Dell EMC Networking Z-Series Switches

Exam Topics
Topics likely to be covered on this exam include:

Networks – The Basics (19.6%)
• Identify common data center topologies, protocols, and topologies; describe the Dell EMC data center switch portfolio
• Basic switch configuration: Identify the normal boot process of a S and Z-Series switch running OS 10. List the first-time switch setup requirements. Perform the steps for upgrading switch firmware in OS 10.
• Access Control Lists: Explain the purpose of access control; apply appropriate commands to deny or permit IP connectivity; complete the required configuration to permit host access control; determine why particular computers are being blocked from accessing a server
• AAA Security: Explain the purpose of AAA security; describe AAA process, core components and their function; configure local and RADIUS authentication
• Dynamic Host Configuration Protocol: DHCP’s basic operation; Explain the role of the DHCP Relay; configure DHCP in OS10; identify the options to secure DHCP from attacks

Layer-2 Technologies and Protocols (20.1%)
• Virtual Lans - Identify the characteristics of a VLAN; explain the differences between tagged and untagged frames; configure VLAN trunking; configure VLAN Port membership; verify trunking and Port Membership; troubleshoot VLANs
• Spanning-tree Protocol - Identify the operations and use cases for STP; Configure and validate RSTP/MSTP/RSTP-PV; Manipulate spanning tree root bridge and port cost configurations
• Link Aggregation Groups - Identify the operations and use cases for LAGs; configure, verify, and trouble shoot static LAGs; configure, verify, and troubleshoot dynamic LAGs
• Discovery Protocols - Describe the characteristics of discovery protocols; describe uses cases for using discovery protocols; explain how to configure and validate. Configure discovery protocols; interpret LLDP outputs

Discovery Protocols - Describe the characteristics of discovery protocols; describe uses cases for using discovery protocols; explain how to configure and validate. Configure discovery protocols; interpret LLDP outputs (30.7%)
• Basic Routing - Configure IPv4 on an interface; identify when to utilize a gateway as a last resort; configure and modify static routes; test inter-VLAN routing
• Open Shortest Path First - describe OSPF operation, and core components; configure and validate OSPF using; interpret OSPF show commands; describe the operations and use cases for ECMP; test inter-VLAN routing
• Border Gateway Protocol - Explain operations of BGP;
• identify design best practices when configuring BGP in a leaf/spine environment; configure and validate BGP; Describe the operations and use cases for ECMP; configure and validate ECMP
• Policy-Based Routing - Describe the basic operation of PBR; identify PBR use cases; configure and validate PBR

Data Center Technologies and Protocols (29.6%)
• Virtual Link Trunking - Describe the components that makeup a VLT configuration; Configure and validate VLTs; troubleshoot basic VLT configuration issues
• Virtual Router Redundancy Protocol - describe the basic operation of VRRP; identify the components of VRRP; describe VRRP Priorities; compare Pre-empt and no Pre-empt; configure VRRP on switches configured for VLT
• Uplink Failure Detection - describe the components and operation of UFD; identify the differences between Active/Active and Active/Standby; configure and verify UFD
• Virtual Routing and Forwarding - describe the operations and use cases for (VRF); configure and validate VRF
• Quality of Service - Describe the basic operation of QoS; Describe how QoS identifies and marks traffic; identify the characteristics of QoS; identify QoS protocols and their uses; configure QoS
• Multicast - Explain in depth the concepts relating to IP Multicast technology; compare IGMP and PIM use cases; identify the steps required to configure multicasting into an existing multicast environment

The percentages after each topic above reflects the approximate distribution of the total question set across the exam.

QUESTION 1
Which type of protocol is OSPF and what metric does it use to determine best path?

A. Link-state protocol that uses a concept of cost as metric
B. Hybrid protocol that uses hop count as a metric
C. Path vector protocol that uses the Dijkstra algorithm as a metric
D. Distance Vector protocol that uses bandwidth and delay as metric

Correct Answer: A

QUESTION 2
What is the function of the authentication service?

A. Validates the user identity
B. Determines switch management commands
C. Validates switch order
D. Determines which services the user is enabled to access

Correct Answer: A

QUESTION 3
A customer reports they can no longer access their services and a network administrator has been assigned to investigate. A UFD disabled error status appears on all ports. What caused the issue?

A. Spanning tree Loop-guard was implemented on the uplink-state group.
B. One of the upstream interfaces is an uplink-state group went down.
C. There was no issue; this is normal behavior.
D. Both a port channel and its members were assigned to an uplink-state group.

Correct Answer: A
Actualkey Dell EMC DCS-IE DES-5221 exam pdf, Certkingdom Dell EMC DCS-IE DES-5221 PDF

Best Dell EMC DCS-IE ES-5221 Certification, Dell EMC DCS-IE DES-5221 Training at certkingdom.com

VCS-278 Administration of Veritas NetBackup 8.1.2 Exam

Use this quick start guide to collect all the information about Veritas NetBackup Administration (VCS-278) Certification exam. This study guide provides a list of objectives and resources that will help you prepare for items on the VCS-278 Administration of Veritas NetBackup 8.1.2 exam. The Sample Questions will help you identify the type and difficulty level of the questions and the Practice Exams will make you familiar with the format and environment of an exam. You should refer this guide carefully before attempting your actual Veritas NetBackup Administration certification exam.

The Veritas NetBackup Administration certification is mainly targeted to those candidates who want to build their career in NetBackup domain. The Veritas Certified Specialist (VCS) - NetBackup exam verifies that the candidate possesses the fundamental knowledge and proven skills in the area of Veritas NetBackup Administration.

Veritas NetBackup Administration Exam Summary:
Exam Name Veritas Certified Specialist (VCS) - NetBackup
Exam Code VCS-278
Duration 105 mins
Number of Questions 75 - 85
Passing Score 65%
Books / Training Veritas NetBackup 8.1.2: Administration
Veritas NetBackup 8.1.2: Advanced Administration
Schedule Exam Pearson VUE
Sample Questions Veritas NetBackup Administration Sample Questions
Practice Exam Veritas VCS-278 Certification Practice Exam
Veritas VCS-278 Exam Syllabus Topics:

Topic Details
Configure NetBackup 8.1.2 - Describe how to configure various master/media/client settings and host properties using the NetBackup administration console.
- Describe how to configure removable media (tape), volume pools, volume groups, and media manager storage units.
- Describe how to configure disk and cloud storage, storage units, and storage unit groups.
- Describe how to configure and utilize backup policies.
- Explain how to implement specialized backup solutions including synthetic backups, True Image Restore (TIR), multiple data streams, checkpoint restart, and the use of backup duplication solutions such as disk staging, Storage Lifecycle Policies,

Auto Image Replication, and NetBackup Accelerator.
- Describe the function, uses, configuration, and administration of the NetBackup deduplication options, such as media server deduplication, client-side deduplication, optimized duplication, and storage servers.
- Describe how to perform catalog backup configuration tasks.

Monitor and Maintain NetBackup 8.1.2 - Describe how to manage tape devices and tape media.
- Describe image management concepts and how to use the NetBackup administration console to verify, expire, import, and manually duplicate backup images.
- Describe how to manage NetBackup disk and cloud storage.
- Interpret available reports to verify and monitor NetBackup.
- Describe how and when to prioritize, cancel, suspend, resume, restart, retry or manually run backup and duplication jobs.
- Describe how to initiate, prioritize, and monitor NetBackup restore jobs.
- Describe how to manage NetBackup Security (e.g., RBAC, host certificates).
- Describe how to install client updates (e.g., VxUpdate).

Tune NetBackup 8.1.2 - Analyze, optimize, and tune NetBackup.
Troubleshoot NetBackup 8.1.2 - Interpret status codes and job details in order to diagnose and troubleshoot failed jobs.
- Troubleshoot devices and media, including connectivity between master, media, and client.
- Troubleshoot common issues related to NetBackup disaster recovery including recovering the NetBackup catalog.

To ensure success in Veritas NetBackup Administration certification exam, we recommend authorized training course, practice test and hands-on experience to prepare for Administration of Veritas NetBackup 8.1.2 (VCS-278) exam.

QUESTION 1
What is a logical destination for NetBackup client's backup data?

A. Selection List
B. Storage Unit
C. Policy
D. Catalog

Correct Answer: B

Explanation:
The logical destinations for a NetBackup client's data include storage units, storage unit groups, and SLP.

QUESTION 2
Which of the following is not a selection type of storage unit groups?

A. First-in First-out
B. Failover
C. Priority
D. Round Robin

Correct Answer: A

Explanation:
The four storage unit group selections include Failover, Priority, Round Robin and Media Server Load Balancing.

QUESTION 3
Which statement is true about OpsCenter?

A. OpsCenter is a premium option from NetBackup that must be purchased separately.
B. OpsCenter and OpsCenter Analytics are both 100% free.
C. OpsCenter cannot be used to manage NetBackup versions prior to 7.5.
D. Basic OpsCenter functionality is included with NetBackup (Additional functionality can be added by purchasing the OpsCenter Analytics option).

Correct Answer: D

QUESTION 4
What are considerations in data protection planning?

A. Retention periods
B. Backup window availability
C. All of the above
D. Maximizing the availability of data
E. Protecting systems and applications

Correct Answer: C

QUESTION 5
Backups can be initiated by many methods.
Which method does not apply?

A. As a user scheduled backup.
B. Manually from the command line.
C. Manually from the NetBackup Administration Console.
D. Automatically, based on a policy schedule.

Correct Answer: A

Actualkey Veritas NetBackup VCS-278 exam pdf, Certkingdom Veritas NetBackup VCS-278 PDF

Best Veritas NetBackup VCS-278 Certification, Veritas NetBackup VCS-278 Training at certkingdom.com

5V0-34.19 VMware vRealize Operations 7.5 Exam

The VMware 5V0-34.19 exam preparation guide is designed to provide candidates with necessary information about the VCA6-NV exam. It includes exam summary, sample questions, practice test, objectives and ways to interpret the exam objectives to enable candidates to assess the types of questions-answers that may be asked during the VMware Specialist - vRealize Operations 2020.

It is recommended for all the candidates to refer the 5V0-34.19 objectives and sample questions provided in this preparation guide. The VMware VCA6-NV certification is mainly targeted to the candidates who want to build their career in Network Virtualization domain and demonstrate their expertise. We suggest you to use practice exam listed in this cert guide to get used to with exam environment and identify the knowledge areas where you need more work prior to taking the actual VMware Specialist - vRealize Operations 2020 exam.
QUESTION 1
Which three Remote Check options are available with application monitoring? (Choose three.)

A. UDP
B. SSH
C. ICMP
D. HTTP
E. SNMP
F. Telnet

Correct Answer: ACD

QUESTION 2
Which two capacity planning models are used by vRealize Operations 7.5? (Choose two.)

A. usage
B. overcommit
C. consumed
D. allocation
E. demand

Correct Answer: DE

QUESTION 3
What are Time Remaining utilization projections based on?

A. historical trends
B. future workloads
C. current utilization
D. what-if scenarios

Correct Answer: B

QUESTION 4
Performance optimization moves virtual compute resources and file systems dynamically across datastore clusters within which space?

A. data centers
B. resource pools
C. networks
D. vCenters

Correct Answer: A

QUESTION 5
What should an administrator enable to protect a vRealize Operations cluster against a single node failure?

A. application remote collector
B. remote data collector
C. replica node
D. additional master node

Correct Answer: C

Actualkey VMware 5V0-34.19 exam pdf, Certkingdom VMware 5V0-34.19 PDF

Best VMware 5V0-34.19 Certification, VMware 5V0-34.19 Training at certkingdom.com

AD0-E308 Adobe Campaign Classic Developer Exam

Certification Benefits
Certification demonstrates to the marketplace that you're able to perform a job role using Adobe's leading solutions. Get recognized for your expertise with Adobe products and differentiate yourself from the crowd.

Target Audience
The typical candidate is able to deliver customized Campaign implementations that meet business requirements and customer needs. They are capable of articulating and conveying technical concepts to a mixed (technical and business) audience. The candidate will have a basic knowledge of web service and project management

Certification requirement

Requirement (Complete 1)
AD0-E308 Adobe Campaign Classic Developer
AD0-E312 Adobe Campaign Classic Developer

Renewal requirement
AD0-E308 Adobe Campaign Classic Developer
AD0-E312 Adobe Campaign Classic Developer

Download exam guide
AD0-E308 Adobe Campaign Classic Developer (English | Japanese)
AD0-E312 Adobe Campaign Classic Developer (English)

You will be directed to the Adobe credential management system, where you will be prompted to log in with an Adobe ID or create a new one. Once logged in, you can access your profile and exam history.

Recommended training

You are not required to complete training before taking the exam; however, training can significantly increase your knowledge and skills. It is important to note that training alone will not provide you with the knowledge and skills required to pass an exam. Successful, on-the-job-experience is critical to providing you the knowledge needed to pass the exam.

Recommended training and sample questions are available in the exam guide. For partners, training options are available in the Partner learner journeys via the Adobe Solution Partner Program portal.

Need more training? Browse our course catalog

For more questions in regard to certification offering , visit or FAQ

QUESTION 1
A campaign target population is cut at 100 random records to receive a limited offer. When the Campaign
developer goes to approve the targeting for the offer, only 90 records are available. Ten records have been
removed by a required topology rule Less than 18 Years Old.
A Campaign developer must make sure exactly 100 records are selected and sent an offer while ensuring compliance.
How should the Campaign developer perform this task?

A. Change the execution order of the Less than 18 Years Old typology rule to execute later
B. Select 110 random records to account for the drop by the typology rule
C. Remove the Less than 18 Years Old rule from the typology defined in the delivery
D. Add a filter to the workflow to select only 18 years of age or older

Correct Answer: C

QUESTION 2
A Campaign developer must configure a campaign hierarchy. Campaign configurations are as follows:
Campaigns are budgeted and planned quarterly (Example: 2017 Q1)
Campaigns are divided into three types: Product Promotional, Communication, Account Maintenance
Campaigns run weekly (Example: Week1, Week2...)
How should the Campaign developer configure the campaign hierarchy?

A. Program Level based on the specific instance of the campaign run (Week1) Campaign Level based on the campaign type (Product Promotion) Plan Level based on the quarter of the year (2017 Q1)

B. Program Level based on the quarter of the year (2017 1) Plan based on campaign type (Product Promotion) Campaign based on weekly run (Week1)
C. Delivery Level based on the quarter of the year (2017 Q1) Plan based on the weekly run on the campaign (Week1) Program based on campaign type (Product Promotion)
D. Plan Level based on the quarter of the year (2017 Q1) Program based on campaign type (Product Promotion) Campaign Level based on the week of the campaign run (Week1)

Correct Answer: C

QUESTION 3
A client wants to use Amazon Redshift to install Adobe Campaign in a hybrid AWS environment to hold all customer data.
Which step must be taken to utilize this type of data?

A. Adobe Campaign does NOT support Redshift.
B. Adobe Campaign tables must be created in the Redshift database.
C. ODBC Native SQL drivers must be installed to access a Redshift database.
D. FDA module must be installed to access a Redshift database.

Correct Answer: B

Actualkey Adobe ACE: Campain Developer AD0-E308 exam pdf, Certkingdom AD0-E308 PDF

Best Adobe ACE: Campain Developer AD0-E308 Certification, Adobe ACE: Campain Developer AD0-E308 Training at certkingdom.com